Marble Care Solutions

Stain free epoxy is water based cleanable solid epoxy mortar and non-sagging system for joint filling of tiles and stone. This kind of joint filling requires high strength. Can be used in heavy traffic area, Epoxy clear is used to fuse natural as well as artificial stone to fill porosity, hair line crack, major crack, and hold. System will also enhance the colour and gloss.

Usage for

• Easy pigmented
• High strength and curing
• Excellent adhesion
• Very good glossy property
• UV resistance

Surface

• Marble
• Granite
• Natural Stone

Sealer works on the concept of solidification and works on the concept of penetration and its structural filling hardens and solidifies surfaces. Due to high penetration in structural, micro gap gets excellent stain free property and very good luster finish on surface after polishing. It can be used for the top surface coating and can be used as an additive for concrete. It is highly recommended on porous surface and provides more glossy sheen with stain repellent effect. Gives slightly darker look to concrete surface. Highly recommended as an additive for concrete.

Usage for

• Very good penetration and damp
• No stain penetration
• No film formulation
• Easy cleaning
• Long lasting glossy finish
• Chemical process required one time only
• Solidification of marble and concrete

Surface

• Marble
• Granite
• Natural Stone

Epoxy is a polyester base glue made up from the mix of resin and nano filler. It is specially used for joint filling for all type of marble, granite, natural as well as artificial stone. It is also used for consolidation and sprouting of stone. Mix system hardens perfectly. This kind of joint filling requires high strength, impact resistance and chemical resistance required. Clear is a two-component low viscous liquid used to fuse natural as well as artificial stone to fill porosity, hair line crack, major crack, and hole. System will also enhance the color of natural stone as well as improve gloss.

Usage for

• Easily Pigmented
• Easy to pour in pin hole and crack of the marble, granite, and natural stone
• Excellent Adhesion
• High Strength after cure
• Very Good Gloss property
• UV resistance

Surface

• Marble
• Granite
• Natural Stone

Enhancer protects the stone from moisture and general stain such as oil, grease, dirt, food, mud and mildew. Enhancer is recommended to protect and provide satin colour enhancing of the natural stone without disturbing the clarity of the stone pattern. The anti-stain action and enhancing property is due to technologically advanced formulation.

Usage for

• Matte enhancing effect
• Non yellowing
• UV stable
• Non filming

Surface

• Textured marble
• Flame granite
• Honed marble
• Sandstone
• Slate stone
• Polish surface

Wet look WB is a unique zero VOC water-based product to give matte colour effect to natural stone without disturbing the clarity of the stone pattern. Product provides permanent wet look to stone and Wet look SB protects the stone from moisture and general stain such as oil, grease, dirt, food, mud, and mildew. Wet look is recommended to protect and provide satin colour enhancing of the natural stone without disturbing the clarity of the stone pattern. The anti-stain action and enhancing property is due to technologically advanced formulation.

Usage for

• Matte enhancing effect
• Non yellowing
• UV stable
• Non filming

Surface

• Textured marble
• Flame granite
• Honed marble
• Sandstone
• Slate stone
• Polish surface

Marble can be slippery after fine polish, especially in bathrooms, staircases, and kitchens. It will be safe to avoid them in such areas, avoid fine finish or ensure alternate anti slippery finishes. Anti-Slip prevents people suffering from incidents caused due to wet and slippery floors. Unique formulation of product does not make any coating and will not peel at any time. Through a chemical reaction Anti Slip creates a microstructure on the surface, leaving the floor slip resistance.

Usage for

• Eliminates accident caused by slippery floor
• Effective under wet condition
• Can be used indoor or outdoor

Surface

• Ceramic tiles
• Porcelain tiles
• Vitrified tiles
• Granite
• Stone terrazzo

Stain Remover is an alkaline based paste to remove iron stain. Unique blend of product reacts with iron stain and converts it into purple colour and easily removes the stain. In very porous stone there is chance of accumulating a purple colour inside stone. So, to avoid the purple colour the use of Stain Remover or Whitened is highly recommended.

Scale Remover is an acidic based formulated detergent for the complete removal of scales from washroom tiles, yellow stain, mortar residues from newly fixed tiles and cement residue, efflorescence from surface. Also recommended to remove cement joint colour from tiles.

Usage for

• Easy Cleaning of the tough stain
• Rapid Action
• Powerful

Surface

• Any Natural Stone

Marble polishing is a treatment that aims to increase the brightness of the stone especially in cases where the marble floor is opaque or yellowed, The bright appearance achieved by polish has been among the reasons for the popularity of marble enhancing stone glossiness is a solvent-based impregnator for protection and enhancement of polish granite and marble surface.

Its ecological formulation guarantees surface protection from dirt, water, oil, grease with enhancing surface look and shiner is a specific water based wax emulsion for application on pre treated porous and polish surface. Application creates a durable and enhancing colour of surface allowing easy further maintenance of surface.

Usage for

• Anti-Stain
• Enhancing
• Ecological
• Durable & Breathable

Surface

• Internal or External Marble
• Granite
• Natural Stone
• Engineered Stone

For crystallizing marble, we are using liquid Polish Marble is a water based multi-functional polishing cream specifically for the maintenance and restoration of dull surfaces, scratches, and watermark. Application unifies surface aspects, while increasing surface gloss matching result obtained by traditional polishing powder on surface. This method provides a high gloss on marble as well as Kota stone without building a film or layer on top of the stone.

Floors get more wear resistance and acid sensitivity is reduced. . So, to avoid the purple colour the use of Stain Remover or Whitened is highly recommended.

Usage for

• Enhance the natural appearance of the stone
• Fast & effective
• Economical
• Easy Daily Cleaning
• Durable
• Hi Gloss
• No Wax

Surface

• Polish Marble
• Engineered Marble
• Terrazzo
• Limestone

The advanced approach to stone finishing is mirror polishing, which involves seven rounds of polishing with carborundum followed by a final buffing with tin oxide. While wax polish reflects less light and wears out quickly, mirror polish delivers superior shine, making it worth the extra effort and cost.

Marble polishing combines the use of chemical products with abrasive equipment, using progressively finer-grained discs. In the final stage, specialized chemicals are applied to achieve a flawless “mirror-like” polished marble surface, enhancing its natural elegance.

Usage for

• Enhanced glossy finish
• Long-lasting shine
• Superior surface smoothness
• High durability
• Better light reflection

Surface

• Marble
• Granite

The floor care and protection system is designed to ensure durability, beauty, and long-term preservation of stone floors. It begins with grinding and structural hardening, followed by filling cracks and pinholes for a smooth base. Pre-polishing and crystallization enhance strength, while mirror polishing adds a brilliant shine. Finally, sealing protects the surface from stains and damage, and daily maintenance with a normal cleaner keeps it looking flawless.

Usage for

• Structural durability
• Crack and pinhole repair
• Improved surface strength
• Stain and moisture resistance
• Long-term floor protection

Surface

• Marble
• Granite
• Natural Stone
• Terrazzo
• Limestone