A Complete Marble Care Solutions

Grouting

High Strength Epoxy for Stone

Stain free epoxy is water based cleanable solid epoxy mortar and non-sagging system for joint filling of tiles and stone. This kind of joint filling requires high strength. Can be used in heavy traffic area, Epoxy clear is used to fuse natural as well as artificial stone to fill porosity, hair line crack, major crack, and hold. System will also enhance the colour and gloss.

Sealer

High-end Protectors for Stone

Sealer works on the concept of solidification and works on the concept of penetration and its structural filling hardens and solidifies surfaces. Due to high penetration in structural, micro gap gets excellent stain free property and very good luster finish on surface after polishing. It can be used for the top surface coating and can be used as an additive for concrete. It is highly recommended on porous surface and provides more glossy sheen with stain repellent effect. Gives slightly darker look to concrete surface. Highly recommended as an additive for concrete.

Grout Filling

High Strength Epoxy for Stone

Epoxy is a polyester base glue made up from the mix of resin and nano filler. It is specially used for joint filling for all type of marble, granite, natural as well as artificial stone. It is also used for consolidation and sprouting of stone. Mix system hardens perfectly. This kind of joint filling requires high strength, impact resistance and chemical resistance required. Clear is a two-component low viscous liquid used to fuse natural as well as artificial stone to fill porosity, hair line crack, major crack, and hole. System will also enhance the color of natural stone as well as improve gloss

Enhancing

High-end Enhancing Stone Protectors

Enhancer protects the stone from moisture and general stain such as oil, grease, dirt, food, mud and mildew. Enhancer is recommended to protect and provide satin colour enhancing of the natural stone without disturbing the clarity of the stone pattern. The anti-stain action and enhancing property is due to technologically advanced formulation

Wet Look

High – End Stone Wet look

Wet look WB is a unique zero VOC water-based product to give matte colour effect to natural stone without disturbing the clarity of the stone pattern. Product provides permanent wet look to stone and Wet look SB protects the stone from moisture and general stain such as oil, grease, dirt, food, mud, and mildew. Wet look is recommended to protect and provide satin colour enhancing of the natural stone without disturbing the clarity of the stone pattern. The anti-stain action and enhancing property is due to technologically advanced formulation.

Anti Slip

PREVENT SLIP IN WET AREA

Marble can be slippery after fine polish, especially in bathrooms, staircases, and kitchens. It will be safe to avoid them in such areas, avoid fine finish or ensure alternate anti slippery finishes. Anti-Slip prevents people suffering from incidents caused due to wet and slippery floors. Unique formulation of product does not make any coating and will not peel at any time. Through a chemical reaction Anti Slip creates a microstructure on the surface, leaving the floor slip resistance.

Stain Remoer

Stain Remover is an alkaline based paste to remove iron stain. Unique blend of product reacts with iron stain and converts it into purple colour and easily removes the stain. In very porous stone there is chance of accumulating a purple colour inside stone. So, to avoid the purple colour the use of Stain Remover or Whitened is highly recommended.

Scale Remover is an acidic based formulated detergent for the complete removal of scales from washroom tiles, yellow stain, mortar residues from newly fixed tiles and cement residue, efflorescence from surface. Also recommended to remove cement joint colour from tiles.

Polisher

High-end Enhancing Stone Polishing

Marble polishing is a treatment that aims to increase the brightness of the stone especially in cases where the marble floor is opaque or yellowed, The bright appearance achieved by polish has been among the reasons for the popularity of marble enhancing stone glossiness is a solvent-based impregnator for protection and enhancement of polish granite and marble surface. Its ecological formulation guarantees surface protection from dirt, water, oil, grease with enhancing surface look and shiner is a specific water based wax emulsion for application on pre treated porous and polish surface. Application creates a durable and enhancing colour of surface allowing easy further maintenance of surface.

Crystalizing

High-end Natural Stone Crystalising

For crystallizing marble, we are using liquid Polish Marble is a water based multi-functional polishing cream specifically for the maintenance and restoration of dull surfaces, scratches, and watermark. Application unifies surface aspects, while increasing surface gloss matching result obtained by traditional polishing powder on surface. This method provides a high gloss on marble as well as Kota stone without building a film or layer on top of the stone. Floors get more wear resistance and acid sensitivity is reduced. . So, to avoid the purple colour the use of Stain Remover or Whitened is highly recommended.

Mirror Polishing

Stone Mirror Polisher

The more advanced approach is called mirror polish, seven rounds of polish with carborundum and final tin oxide buffing on top. The wax reflects less light and wears fast, but the mirror polish shines better, hence the latter is worth the time and money it demands.

Marble polishing is a process that combines the use of chemical products and abrasive equipment: with increasingly finer-grained discs. In the final phase of marble polishing, chemical products are added to obtain a “mirror” polished marble surface.

Floor Care & Protection System